化合物简介
Ethyl tert-butyl ether (ETBE) is commonly used as an oxygenate gasoline additive in the production of gasoline from crude oil. ETBE offers equal or greater air quality benefits than ethanol, while being technically and logistically less challenging. Unlike ethanol, ETBE does not induce evaporation of gasoline, which is one of the causes of smog, and does not absorb moisture from the atmosphere.
基本信息
中文名称
叔丁基乙醚
英文名称
tert-Butyl ethyl ether
中文别名
乙基叔丁基醚、叔丁基乙基醚
英文别名
Propane, 2-ethoxy-2-methyl-、2-ethoxy-2-methylpropane
CAS号
637-92-3
分子式
C6H14O
分子量
102.175
精确质量
102.104
PSA
9.23
LOGP
1.8214
编号系统
MDL号
MFCD00009225
EINECS号
211-309-7
物化性质
外观与性状
透明无色液体
密度
0.742g/mLat 25°C(lit.)
沸点
72-73°C(lit.)
熔点
−97°C(lit.)
闪点
-19 °C
折射率
n20/D 1.375(lit.)
稳定性
Stable, but may react with air to form peroxides. Once opened, store under an inert atmosphere and test for the presence of peroxides before use. Highly flammable. Incompatible with strong oxidizing agents.
储存条件
Flammables area
蒸汽压
155 mm Hg ( 25 °C)
安全信息
RTECS号
KN4730200
安全说明
S16-S26
危险类别码
R11
WGK Germany
1
危险品运输编码
UN 1179 3/PG 2
海关编码
2909199090
危险类别
3
包装等级
II
危险品标志
F; Xi
生产方法及用途
生产方法
1.制法:
于装有搅拌器、温度计、滴液漏斗、分馏装置的反应瓶中,加入20%的硫酸1.2kg,二氧化硅0.5g,搅拌下加入乙醇450mL,加热至70℃,慢慢滴加叔丁醇350mL。同时有醚蒸出。控制馏出速度在0.5~0.75mL/min,柱顶温度在64℃左右。约10h加完,收集馏出液450mL左右。将馏出液水洗,无水碳酸钠干燥,再加入金属钠回流,以除去可能存在的醇。分馏,得乙基叔丁基醚①
(1)。注:①也可用用碳酸或硫酸氢钾作反应的催化剂。仲醇与叔醇反应可以生混合醚,此时可以使用弱催化剂,如硫酸氢钠、硫酸氢钾等,它们可以使叔醇脱水生成烯,烯再与仲醇发生加成反应生成混合醚。
于装有搅拌器、温度计、滴液漏斗、分馏装置的反应瓶中,加入20%的硫酸1.2kg,二氧化硅0.5g,搅拌下加入乙醇450mL,加热至70℃,慢慢滴加叔丁醇350mL。同时有醚蒸出。控制馏出速度在0.5~0.75mL/min,柱顶温度在64℃左右。约10h加完,收集馏出液450mL左右。将馏出液水洗,无水碳酸钠干燥,再加入金属钠回流,以除去可能存在的醇。分馏,得乙基叔丁基醚①
(1)。注:①也可用用碳酸或硫酸氢钾作反应的催化剂。仲醇与叔醇反应可以生混合醚,此时可以使用弱催化剂,如硫酸氢钠、硫酸氢钾等,它们可以使叔醇脱水生成烯,烯再与仲醇发生加成反应生成混合醚。
用途
溶剂、汽油添加剂、抗震剂、胆固醇结石的直接溶解剂。
合成路线
共找到13条合成路线 >上游原料
共找到20个上游原料 >